VLX 80 Casement Window

VLX 80 Casement Window in Tampa, FL | Meridian Windows and Doors Tampa

The VLX 80 Casement Window is a side-hinged aluminum window built around two ideas: let in as much light and air as possible, and keep the frame from getting in the way. It’s a window homeowners in Tampa choose when they want a clean, modern look without sacrificing ventilation, which matters a lot here during the long, humid stretch from May through October. Meridian Windows and Doors Tampa is an authorized installation partner for ViewLux, the manufacturer of the VLX 80, which means you’re getting the product installed by a team that knows this exact frame, its hardware, and its tolerances, not a crew seeing it for the first time on your wall. Call (850) 821-3041 for a free estimate in Tampa, FL.

Call (850) 821-3041

Product Overview – VLX 80 Casement Window

The VLX 80 is the kind of window you spec when the frame should disappear. With a profile width of just 1.97 inches, these are ultra-narrow sightlines, which is the phrase we use when the aluminum holding the glass is thin enough that what you notice is the view, not the metal around it. Casement windows hinge on the side and crank outward, so the entire opening clears for airflow. That’s the maximum ventilation part. You won’t get that from a sliding window, where one sash always blocks half the opening.

Why buyers choose this series over cheaper vinyl or bulky aluminum alternatives in Tampa comes down to a few things. First, aluminum holds its shape across decades of heat, rain, and salt air. Vinyl sashes can warp in Florida sun; the VLX 80 doesn’t. Second, the narrow frame means more glass area per rough opening, which matters if you’re renovating a mid-century ranch in Seminole Heights or a contemporary build in Hyde Park and want the sightlines to feel open. Third, it’s a true thermal-break system, which addresses the old knock against aluminum windows: that they conduct heat. The VLX 80 breaks that thermal bridge, and Meridian Windows and Doors Tampa installs it so the break actually performs. You get the strength and slimness of aluminum with energy numbers that hold up to a Tampa summer.

The engineering inside this window is quiet and deliberate: multi-chamber profiles, consistent wall thickness of 0.079 inches, and hardware that’s tested to cycle thousands of times without sagging. Casement windows live and die by their hardware, since the whole sash hangs from those hinges. ViewLux builds the VLX 80 around that fact. And because Meridian Windows and Doors Tampa is an authorized partner, every installation follows the manufacturer’s own installation tolerances. Call (850) 821-3041 to talk about your project in Tampa.

Technical Specifications

• Frame material: Thermally broken extruded aluminum
• Profile width: 1.97 inches – one of the narrowest casement profiles in its class
• Wall thickness: 0.079 inches
• Operating style: Side-hinged casement, manual crank operation
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen, Retractable Screen
• Sill options: Standard Sill, Low-Profile Sill
• Energy standard: NFRC-rated thermal break performance
• Installation standard: AAMA 2400/2410 compliant, AAMA 812 perimeter sealant
• Impact option: Impact-resistant laminated glass for wind-borne debris zones

Performance Features

Thermal Efficiency – The VLX 80 uses a thermal break between the interior and exterior aluminum profiles. That break interrupts the metal-to-metal heat path that makes non-thermal aluminum windows sweat and spike cooling bills. NFRC-rated performance means the numbers are tested, not estimated. In Tampa, where air conditioning runs nine months a year, this is the feature that pays for itself.

Acoustic Performance – Aluminum frames with proper perimeter sealing do more than keep water out; they cut sound transmission. The VLX 80’s frame tolerances, combined with laminated glass where chosen, reduce road noise on busy Tampa corridors like Dale Mabry, Gandy Boulevard, and Bayshore. If you’re near the airport flight paths or a school zone, ask us about laminated acoustic glazing packages.

Airtightness & Weather Seal – The casement’s compression closure is the quiet advantage here. When you crank a casement shut, the sash compresses against weatherstripping on all four sides. A slider only overlaps. The result is measurable airtightness that keeps conditioned air in and humid outdoor air out, which matters every single day in a Tampa summer.

Waterproofing – This is where installation separates good windows from future drywall repairs. Meridian Windows and Doors Tampa seals every perimeter joint with AAMA 812 low-expansion foam, then applies the exterior flashing and sealant in the correct shingled sequence. The VLX 80 is designed to shed water; our install guarantees it does.

Wind Resistance – Wind-load ratings matter in a city that sits in the cone of probability for every Atlantic storm. The VLX 80 is wind-load rated for local climate requirements, and with impact-resistant laminated glass, it meets the strictest Tampa and Hillsborough County codes for wind-borne debris protection. That’s not an upgrade we hope you never need. In Tampa, it’s a baseline conversation.

Security & Hardware – Casement windows are inherently harder to jimmy than sliders or double-hungs because the sash locks directly into a multi-point latch embedded in the frame. The VLX 80’s crank hardware is stainless steel and corrosion-resistant, which matters in Tampa’s salt-humidity air near the bay and the coast.

Color & Glass Options

The VLX 80 comes in six finishes, and choosing one usually comes down to the house, the HOA, and the look you’re after. Premium Black is the most requested finish in Tampa right now, especially on modern builds in Channelside and along the Riverwalk, where dark frames read as architectural. Pure White suits traditional Florida styles: bungalows in Riverside Heights, the ranches peppered through Carrollwood. Anodized Silver is a quiet, metallic finish that disappears on glass-heavy walls. Bronze gives a warm, mid-century feel that works on older homes in Temple Terrace. Champagne is a softer alternative to silver, with a warm undertone. Teak Wood is for the homeowner who wants a wood look but refuses to maintain wood in Florida humidity.

Glass selection depends on exposure and code. Low-E is the minimum we recommend in Tampa for any sun-facing elevation. Tempered is code-required for certain locations and sizes. Laminated is the impact option, and it also happens to be the best choice for noise control. Frosted works for bathrooms and side yards where privacy matters more than view. Clear is available, but we steer most Tampa homeowners toward Low-E or laminated. Call (850) 821-3041 and we’ll walk you through it in plain language.

Installation by Meridian Windows and Doors Tampa in Tampa

Here’s the reality of window installation in Tampa: the best window on the market will fail if it’s not set correctly. A window that’s out of level by an eighth of an inch will bind, leak, and eventually defeat its own weatherstripping. A frame that isn’t flashed and foam-sealed properly will invite water into the wall cavity, and Florida humidity does the rest. This is why manufacturer warranties specifically exclude failures caused by improper installation, and why buying the VLX 80 through a ViewLux-authorized partner like Meridian Windows and Doors Tampa matters.

Our installation process for the VLX 80 follows the AAMA 2400/2410 standard. We start with a pre-installation inspection of the rough opening: stud condition, existing flashing, any signs of water intrusion from the old window. If we find rot or compromised framing, we flag it before we install, not after. Then we set the window level, plumb, and square, shimming precisely so the frame isn’t twisted. The perimeter gets AAMA 812 low-expansion foam sealant on every joint. Low-expansion matters; the wrong foam can bow a frame. Exterior flashing and sealant follow in the correct sequence so water drains down and out, never in. We finish with a water test and full cleanup, including hauling the old windows away.

Tampa’s climate puts specific demands on any window: high UV, high humidity, afternoon thunderstorms, and hurricane-season wind. We install to those realities. Building codes in Tampa and Hillsborough County require impact-rated openings in many cases, and we’ll tell you honestly whether your project needs laminated impact glass or if standard glazing meets code for your specific elevation and exposure.

Reach us at (850) 821-3041 to schedule a site walk in Tampa, FL.

Frequently Asked Questions – VLX 80 Casement Window

Get a Quote – VLX 80 Casement Window in Tampa

If you’re considering the VLX 80 for a single room or a whole-house replacement in Tampa, start with a free on-site measurement. We’ll confirm your sizes, review glass and finish options for your specific elevation, and give you a written, line-item quote with fixed pricing. No change orders, no surprises. Call Meridian Windows and Doors Tampa at (850) 821-3041 to schedule your free estimate.

Written by the team at Meridian Windows and Doors Tampa, an authorized ViewLux installation partner serving Tampa, FL and surrounding communities.